Archie

My adoring fans have reminded me that it’s been a long time since I’ve blogged. And she is they are right.

As I mentioned a while back, I’ve been participating in the Sewing Buddy Challenge at Whipstitch.

Our first challenge wrapped up this month, and my partner and I won 2nd place! We were to collaborate to make a pair of boy/girl projects, which works out perfectly since I have Dexter and Elisabeth has her baby daughter, Cate. We made these precious little dolls from Wee Wonderfuls called Olive and Archie.

This pattern was absolutely worth the money. I only had one problem with it, which I will go into later. But, for your $15, you get the patterns for both Olive and Archie, plus all sorts of clothes, and accessories including backpacks, sleeping bags, and a cat pal.

Elisabeth and I chose a color palette, using Moda’s A Walk in the Woods line as our inspiration. I would have loved to just get some of that fabric, because it is PRECIOUS, but I’m trying to stash-bust. So I had to bring that vibe to my doll while keeping down extra purchases.

I created a few sketches, with three major goals in mind:

1. Use what I have as much as I can.

2. Stick to the color palatte/theme we chose.

3. Make the little guy look as much like Dexter as possible.

I easily found a felt in color similar to Dexter’s hair. I ended up getting a blend because I was trying to keep costs down. I can tell that it’s pilled a bit, but overall I think it’s fine.

But finding a skin tone nearly drove me crazy. I shopped at Joann Fabrics, which I normally really like. But they had a whopping total of two fabrics that could possibly work for skintone. One of them was too orange (we are an extremely pale family) and the other was thinner and weirder looking than I’d like. I made the smart choice and went with thin and weird.

I started stitching my hair on. So far so good. Except in this photo, you can see straight through to the paper under the fabric. But surely that won’t be a problem, right? Right??

I’m 99% certain I washed my fabric before cutting. But I really can’t remember now. After sewing all my hair on and starting to assemble the body, I ironed some seams, and suddenly the weirdness of the fabric became an actual problem.

The fabric melted/shrunk. The photo above shows the difference between the pattern piece and how much shrinkage occurred. In retrospect, desperation to find the right color may have caused me to get something partially synthetic. But I will never know, because when I went back to Joann for a replacement, I couldn’t find the mystery fabric.

So I came some with the too-orange fabric, washed it… and then realized under our lights that it was yellow.

Long story short, I went to Hobby Lobby and found an acceptable fabric. The twist: A few days after I submitted my doll, I found my own stash of fleshtone fabric. Sigh.

Aside from that, the pattern started out ridiculously easy. But there comes a point when the creator tells you that you will be cursing her name, and she was not wrong. I didn’t curse *her* per se, but I nearly lost it several times. The problem is that wretched bottom panel. If you’ve made this pattern before, I’m sure you know what I am talking about. If you haven’t and plan to, you *will* know what i’m talking about! I Googled and searched and pleaded to the internet fairies to give me the answer and I never found it.

In the end I just had to wing it. So Archie has a funky butt.

I thought it might bother me that my handstitching is so awful, but I’m just glad that part is over. And as with childbirth, I’ve almost forgotten the pain and would do totally do it all over again.

The eyes where my only other creative difficulty, because I wanted Archie to look like Dexter, but Dex has hazel eyes that are difficult to replicate.

I almost settled for these plain dark eyes, which I love, but I just really wanted light eyes, even if they were still wrong. So I chose to do a circle of charcoal gray with pale blue on top to create irises.

I stuck on all the features, subbing felt scraps for the mouth and nose, to get the correct placement and shapes. Then I just stitched on the face.

I made a little red jacket last minute using the hoodie pattern included in the set. I didn’t finish the seams, because I was running out of time. But I really wanted that pop of color to complete the look I was going for. It was then that I realized that I didn’t like the placement of the arms, beause with the jacket on, things look a little weird and the jacket actually doesn’t want to stay on.

But, I was extremely happy with how he turned out!

More importantly, Dexter is extremely happy with him. I wish I could have captured how thrilled he was initially. I gave him the choice of whether he wanted to change the name and he really liked “Archie”. Or “Artsy”, as he calls him.
And he sleeps with Archie every single day.
Even if I didn’t win anything in the challenge, this would have been enough!
But I won’t say no to the 1/2 yard bundle of fabric 2nd place gets :-P.

Felt Piglet Tutorial

We’re having a Winnie the Pooh craze around here. Craze may be putting it a little strongly, but Dexter is frequently Pooh, pretending to suck honey off his hand and telling me he’s spitting out bees. He asked the other day if I’d make him a piglet… so I paused for a half-second and said, “Sure!”

If you’d like to use the exact pattern* I traced out, here it is:

 
I’ll show below how to assemble him and how I drafted my pattern.
*1. Where the body meets the legs, use the top pink line. The lower one was a mistake I didn’t remove. *2. My pattern is not symmetrical. It just didn’t occur to me until it was too late. This will be most obvious on the ears, the inner parts need to match the correct ear, unless you care to correct that on your pattern.

You can do this with any character really. Piglet is pretty simple in that he’s almost entirely made up of 2 colors. I found a picture online, blew it up to the size I wanted, printed it… and realized it wasn’t quite as big as I’d expected. So I roughly traced around it to enlarge it.

IMAG0218 (1)

You can see that I did a lot of correcting throughout the whole process. I was flying by the seat of my pants and really didn’t spend anytime in the planning phase! But all of these corrections should be reflected in the PDF pattern.

I folded over my felt and traced the pattern onto the side of the fabric that would be on the inside. Then I cut out both layers together.

       IMAG0219 IMAG0220 

Next, I went scrounging for fabric for clothing. I didn’t want to have to hem anything, so I used only felt and t-shirt scraps. I didn’t have any dark pink, and I felt like he just HAD to have stripes. I figured purple would work too. It’s a warmer purple than it looks in all these pictures.

IMAG0222     
So, lay Piglet down where you’d like the stripes to fall. Again, fold your fabric, with the wrong sides facing out.

I used a Sharpie to mark the points at his neck and crotch, and then traced the sides of his tummy.

       IMAG0223 IMAG0224

You’ll get a an outline that looks like the picture on the left (if you do it without the pattern I linked). Then just connect all the lines, making a dip at the top for his chin.

       IMAG0225 IMAG0226 

Then I turned all the pieces right-side-up and started building Piglet.

IMAG0229

Cut out all the facial features. He’s starting to look pretty cute! Also, he looks a little broader than normal, but when he’s stuffed, it turns out just right.

IMAG0230

Sew on all the dark pieces.

IMAG0232

Next, layer the snout.

IMAG0233

Then add the little nose triangle.

IMAG0234 
Then sew the clothes to the front and the back. Remember, you have not put him together yet, your back piece should still be separate from the front.

       IMAG0235 IMAG0236

Flip the sides and trim off any excess t-shirt fabric. You’ll want to check the front side after you do this and make sure you trim the parts you can’t see from the back.

IMAG0237 
Now you create your Piglet sandwich (hmm…) and sew around the outside, starting below one ear, and ending at the bottom of the next ear.

IMAG0238
 
Piglet’s head should be floppy and open like this:

IMAG0239 
Stuff the arms and legs first, leaving it slightly soft where they connect to the body, so that he won’t be completely stiff. Then talk some little kid into stuffing the rest for you. Actually, he got tired of this pretty quickly and I had to finish. He just wanted to shred the stuffing.

       IMAG0241 IMAG0242

Then I stitched across the arm joint to give them a little range of motion. I didn’t bother doing this with the legs, but you’re welcome to try if it pleases you.

IMAG0245 
Round the Polyfil at the top, keeping it clear of where seams will be. I didn’t put any stuffing in the ears.

IMAG0247 
Sew around the curve of the head, still ignoring the ears.

IMAG0248 
Pin the pink parts onto the ears. Keep in mind that if you used my pattern, the ear parts are not interchangeable.

IMAG0250
Sew around the edge of the dark pink, both attaching it to the ear and closing the ear openings.

IMAG0251
Then trim off the threads and he’s good to go!!

IMAG0252
The first thing Dex did was cram him down into a jar. Poor Pickled Piglet.

IMAG0260
And he felt like he needed to compare the pattern to see if they matched up.

IMAG0263

He now sleeps with Piglet every night, which is awesome. I should add that felt starts to look a little ratty when it’s handled by sticky hands everyday. Just a heads up.

There are lots of steps, but this was a pretty quick project. All told, it took me about 2 hours to complete, including drafting the pattern and taking pictures.

I’d love to see if anyone comes up with any other characters! I hope to make a Winnie the Pooh sometime! But then I’d probably lose it and end up making the whole Winnie the Pooh family. Felt is dangerous!

Felt Food Tutorial and Patterns

photo (7)

Here is the moment we’ve all been waiting for… (there’s totally a drumroll)…

I learned to create patterns in pdf form!!!!

I’ve been saying I’d do this for the longest time. It really wasn’t as hard as I was worried it would be. One day I’ll post about that for the other chickens out there Smile .

Patterns:

You’ll notice that most of the patterns call for cutting 2 pieces of felt, even for something flat. This is for stability, because you can warp or even tear felt pretty easily.

I tried to keep everything simple. All the stitching is on the outside, there’s no flipping or turning things inside out. And I did everything by machine.

Assembly Tutorial:

photo (14)

Cheese: Probably the easiest thing you’ll make in the felt food world. Cut 2 rectangles of felt, and sew them together. Tada! You’ve made cheese. You have some creative options here: you can change colors for different types of cheese slices (think off white with stitched sprinkles for Monterey Jack), oval for provolone, and if you want Swiss, my suggestion is to sew circles, and then trim the holes.

photo (11)

Bacon and Eggs: Felt food must-haves! Cut 2 egg whites and 1 yolk for each egg. Sew the yolk onto one of the whites, leaving a small opening. Very lightly stuff the yolk with polyfil and close the opening. Then put your 2 egg whites together, with the yolk on the outside, and sew all the way around.

For the bacon slices, I only cut 1 layer, because I felt like those lighter strips would be secure enough. Cut your darker bacon slices and 2 lighter strips for each slice. Just freehand those stripes, there is no reason to try to conform them to a pattern, and I think it would be more difficult to do so. Lay the light strips on top of the darker fabric and stitch around the strips.

photo (15)

PB&J Sammy: I wanted everything to be as simple as possible, so these bread slices are flat, flat, flat! For each slice, cut 1 dark piece (that will become the crust) and 2 lighter pieces. This was actually the most difficult thing I did, despite trying to keep simplicity in mind. Sandwich those 3 pieces (light, then dark, then light) and pin the layers. You want to stitch around the edges of the light felt, catching all 3 layers. One of my slices came out perfectly the first time. The other slice slipped and I had to redo it a couple of times.

For the peanut butter and jelly, cut 2 pieces each and sew together. Super easy.

If you want to go a little further, you could make sandwich meats out of circles and ovals. I also want to make lettuce and tomato slices one day, but I just didn’t bother this time. Dexter already has a wooden sandwich set anyway. 

photo (12)

Broccoli: I had a lot of fun making the little veggies! I was inspired by Dana at MADE for the broccoli and chicken legs for sure. In fact, I was probably most inspired by her felt food, because I saw how simple it could be instead of trying to create incredibly detailed 3D models of food.

Back to the broccoli. For each piece, cut 2 stalks, and sew those together. Cut 2 florets, my recommendation is to cut ovals just slightly bigger than you want your floret to be. This is another time where freehanding is going to be easier on you.

Ok, I said oval, but what I did was more like a little mushroom cap. You take your 2 little mushroom cap shapes, and freehand a broccoli shape around the top, leaving the bottom open.

broccoli top

Next, take a little bit of polyfil and stuff the top. Then poke your little stalk into the opening, and stitch it closed. Like this:

broccoli

(Bet you can’t tell that I’m sketching these out as I go…)

Then trim your broccoli tops, and you’re done!

photo (13)

Beans/Peas: Cut your 2 pieces. Sew along the curved back, leaving the inner curve open. Ball up polyfil into 3 little pea-sized… well… peas. Or beans. Put them in a row inside your shell. Sew up the inner circle.

photo (8)

Carrots: These go together like the broccoli pieces. Sew your little carrot tops together, then sew the carrots, leaving the top open. Stuff with polyfil, then put the stem inside the opening and stitch shut. Then, I ran these guys under my sewing machine to create the lines. It wasn’t super easy, I had to help them along. Don’t “help” them so much that you break a needle. But some light pressure should be ok.

photo (10)

Chicken Legs: I’m in love with these little chicken legs. Sew the 2 meat parts together, leaving the bottom open. Sew the 2 bone pieces together, leaving the top open. Stuff both sections with polyfil. I stuffed these a little more firmly, leaving it a little softer at both of the openings. Insert the bone into the meat opening (Ok, I just realized how creepy meat assembly sounds!), and stitch across all layers. 

photo (9)

Cookies: You can make different kinds of cookies. Whatever you make, sew the add-ons to the top before you sew and stuff the actual cookie (or if you plan to hand stitch, you can do the add-ons at any time). Then sew most of the way around the 2 cookie layers, stuff lightly (you don’t want these to be too puffy), and then sew across the opening.

IMAG2123

Pancakes: These were the first items I made, and I couldn’t find them when I did my photo shoot, AND I only took one phone picture of them before I gave them away. I did not think ahead to when I’d be doing a fancy-schmancy tutorial.

At the time, I did these a little differently than I would now. You can probably see the batting peeking through. That was before I realized that stuffing with polyfil works just as well and actually looks better.

For the pancakes, cut 2 pieces, sew most of the way around, stuff lightly with polyfil, and close ‘em up.

For the syrup, cut 2 pieces, sew together.

For the butter, cut 2 pieces, sew 3 sides, lightly stuff, sew the 4th side. (I feel silly for typing out all these directions, since most of them are “cut 2, sew together”, but I wanted this to be as easy as possible for anyone making them!)

Now, when I made these, I thought I had just created the most amazing thing ever. And then I found these on Etsy. I guess there are only so many ways to make felt pancakes!

Oh, I also indicated on the pancake pattern that this is also what I’d use to make a hamburger. And yet, I have not created a hamburger bun pattern. I will do that soon though, because my sister has requested a hamburger for her boys. I’ll probably tackle the lettuce and tomato slices at the same time.

Links:

Now, I promised links to all the felt food that inspired me, but it was extremely hard to go back and find those!! I will add what I found, and maybe this was all. I know for some of the items I just did my own thing, making them look the way I thought they should look. But I truly don’t want to take credit for something someone else did, so I am sorry if I missed a link!!!

Dana at Made (The cutest little almost-2D picnic set! And I just noticed she has bread slices in there too, so maybe that’s where I got that inspiration as well as the broccoli and drumsticks)

Pickle Things at Black Wagon (This is likely an inspiration for the cookies.)

Stitches by Krustal (I didn’t get my cheese from here- I don’t think that sad little cheese slices are particularly inspired, as they are just squares- but I plan to use this as a jumping off point for my future hamburger bun, because the style is very similar to my felt food philosophy. And if you don’t want to wait for my version, which will probably only be slightly different, this would be a good place to go for a simple bun.)

Now, go have fun felt-fooding it up!!

Croup, Croup, and MORE CROUP

 I had every intention of posting those felt food patterns on Monday, but we have been under the Reign of Croup since Saturday. My poor child gets croup a lot. But this is the worst ever, and we have all been up for several nights and catching up on sleep during the day. Except for my poor husband, who has to work and is unable to catch up on sleep.

But I just wanted to drop a quick line, while I scarf some leftover pizza, to say that my very next post will be those patterns. I am NOT flaking out. We just trying to get out of survival mode!

Felt Food Frenzy

This year my Dexter’s Christmas gift was a beautiful play kitchen. So I went crazy making accessories for myself him.  
 
It was so much fun coming up with ideas for mildly 3-dimensional foods. I also found a lot of great inspiration online. I didn’t want to have to put a lot of thought into it or sculpt something magnificent. I just wanted to throw together a lot of fun little pieces to spark some imaginative play.  
 

 
 

The hardest things to create were the teeny tiny oven mitts, but I hand-sewed binding for the first time, and I’m excited to take that to the next level on a quilt soon!  

Eventually I will compile some links and upload patterns/templates/tutorials (don’t hold your breath, I’m not super great at adding actual patterns…), but for now, I want to showcase my work!  

 

 

 
 
 
 

Sneak Peek: Hair Bands

I am SO excited about our new hair bands! Deborah and I are both starting to wish we had a little girl to put them on. Our husbands were NOT happy when we tried them on our boys to see how they fit lol.

Here’s a sneak peek at what we have so far:IMG_5789 

I love them all so far, but here are close ups on a few of my favorites: IMG_5791  IMG_5792

These will be sewn onto head bands (and maybe clips if we can find some that are CPSIA certified). Next week we’ll be photographing what we have and hopefully we will have our shop up and running by this coming Friday. We’re both so excited!!! Our accessories will make perfect gifts for Christmas!

If you haven’t seen the ties Deborah is making (which are awesome), then head over to her blog!